Die NVIDIA Quadro K5000M ist eine DirectX 11.1 und OpenGL 4.3 High-End-Workstation-Grafikkarte für Notebooks. Sie basiert wie die Consumer GeForce GT 680M auf dem GK104 Chip der Kepler-Serie und wird in 28nm bei TSMC hergestellt. Die Grafikkarte ist für die Chief River Generation gedacht (Ivy Bridge) und die Nachfolgerin zur namensähnlichen Quadro 5010M (Fermi, Huron River Plattform). Üblicherweise werden 4 GB GDDR5 als Grafikspeicher eingesetzt, die mit 750 MHz (I/O-Takt 1.500 MHz, effektiv 3.000 MHz) getaktet werden und über einen 256 Bit Speicherbus angebunden sind.
Die Quadro Grafikkarten bieten zertifizierte Treiber, welche auf Stabiltität und Performance bei professionellen Anwendungen (CAD-, DCC-, Medizin-, Prospektions-, Visualisierungsanwendungen) optimiert sind. Dadurch ist die Performance im Vergleich zu den Consumergrafikkarten mit gleichem Chip deutlich besser in diesen Bereichen.
Architektur
Mit Kepler löst Nvidia die bisherige Fermi-Architektur ab, die unter anderem bei verschiedenen Chips und Modellen der GeForce-500M-Serie zum Einsatz kam. Der GK104 verfügt als Kepler-Chip über 8 Shader-Blöcke mit je 192 CUDA Cores, die vom Hersteller mit dem Kürzel SMX bezeichnet werden. Bei der K5000M sind davon 7 aktiviert. Zwei SMX bilden zusammen mit zwei Polymorph Engines und einer gemeinsamen Raster Engine einen sogenannten GPC (Graphics Processing Cluster). Da die Shader keine eigene Takt-Domain mehr besitzen (Hot Clock), entspricht die Rechenleistung in etwa er Hälfte der Einheiten der Fermi-Architektur mit doppelter Taktrate. Diese Änderung ist einer der Gründe dafür, dass sich laut Nvidia die Energieeffizienz gegenüber dem Vorgänger verdoppelt hat. Auch die Tesselations-Leistung soll, speziell bei hohen Faktoren, noch einmal deutlich verbessert worden sein. Als zusätzliche Neuerungen werden zudem erstmals PCIe 3.0 sowie ein noch nicht näher bezeichneter, optionaler Turbo-Modus unterstützt. Dieser kann, ausreichende Kühlungsreserven vorausgesetzt, die Kerntaktrate um bis zu 15 Prozent anheben. Da der Turbo vom BIOS gesteuert wird, steht er, falls vom Notebook-Hersteller implementiert, unabhängig vom Betriebssystem zur Verfügung.
Leistung
Die Performance der Quadro K5000M liegt deutlich oberhalb der Fermi basierenden Quadro 5000M. Im Vergleich zur GeForce GTX 680M fällt die Karte jedoch etwas zurück, da die Taktraten etwas niedriger ausfallen (herstellerabhängig). Dennoch übertrumpft die K5000M alte High-End-Modelle wie die GTX 675M spielend und stellt die meisten aktuellen 3D-Spiele mit maximalen Qualitätseinstellungen flüssig dar (Stand 2012).
Features
Das aktualisierte Featureset umfasst nun die Unterstützung von bis zu 4 aktiven Displays (mit Optimus u.U. weniger), die mit einer maximalen Auflösung von 3840 x 2160 Pixeln zum Beispiel über DisplayPort 1.2 oder HDMI 1.4a angebunden werden können. HD-Audio-Formate wie Dolby True HD und DTS-HD lassen sich als Bitstream an einen geeigneten Receiver senden. Wie in der Vergangenheit kann jedoch auch weiterhin 3D Vision nicht mit Optimus-Unterstützung kombiniert werden.
Die Rechenkerne der Grafikkarte können per CUDA und OpenCL 1.2 auch für generelle Berechnungen herangezogen werden.
Der PureVideo HD Videoprozessor der fünften Generation (VP5) wurde vom GF119-Chip übernommen. Dieser kann die Formate MPEG-1, MPEG-2, MPEG-4, H.264 und VC1/WMV9 bis zu einer Auflösung von 4k decodieren und somit den Prozessor entlasten. Auch zwei parallele Streams, beispielsweise für Picture-in-Picture bei einer Blu-Ray, sind möglich. Eine weitere Neuerung ist die Integration eines dedizierten Videoencoders ähnlich Intels Quick Sync, der über die NVENC-API angesprochen werden kann.
Die Leistungsaufnahme der Quadro K5000M ist laut Nvidia wie die alte Quadro 5010M mit einem TGP (Max Power Consumption) von 100W spezifiziert und dadurch für 17-Zoll Plattformen geeignet.
Die Nvidia GeForce GTX 1050 mit Max-Q Design ist eine Mittelklasse-GPU basierend auf der Pascal-Architektur und wurde im Januar 2018 vorgestellt. Je nach Kühlungsdesign ist sie 10-15% langsamer als eine GTX 1050. Wie die GTX 1050, basiert die Max-Q Variante auf den GP107 Chp, der in 14 nm bei Samsung produziert wird.
Im Vergleich zur normalen GTX 1050 gibt es noch weitere Unterschiede als den Takt. Der Treiber wurde auf Effizienz (und nicht Leistung) optimiert (nur für die Max-Q Modelle), optimierte Spannungswandler für 1V Betreib, high-end Kühlungsmethoden und eine 40 dB Grenze für die Lüfterlautstärke (mit Taktanpasssungen um dies jederzeit zu gewährleisten) zeichnen die Max-Q Variante aus.
Features
Der GP107-Chip wird in einem 14-nm-FinFET-Prozess bei Samsung gefertigt und bietet eine Reihe neuer Features, unter anderem Support für DisplayPort 1.4 (ready), HDMI 2.0b, HDR, Simultaneous Multi-Projection (SMP) sowie verbessertes H.265 Video De- und Encoding (PlayReady 3.0). Eine genaue Auflistung der Verbesserungen und Features der neuen Pascal Desktop-GPUs finden Sie in unserem Pascal-Architektur-Artikel.
Performance
Die exakte Performance der GeForce GTX 1050 Max-Q kann sich in Abhängigkeit von der Kühlung des jeweiligen Notebooks stark unterscheiden. Nvidia gibt an das die durchschnittliche GTX 1050 mit Max-Q Design etwa 10 bis 15 Prozent langsamer ist als eine GTX 1050. Dadurch eignet sich die Grafikkarte am besten für Full HD und hoher (aber nicht maximaler) Detailstufe.
Leistungsaufnahme
Die Leistungsaufnahme der GeForce GTX 1050 Max-Q ist von Nvidia mit 34 bis 40 Watt angegeben (je nach Taktung) und damit deutlich geringer als die 53 Watt der normalen GeForce GTX 1050. Dadurch eignet sich die Grafikkarte auch für dünne und leichte Notebooks.
Die NVIDIA Quadro K4000M ist eine DirectX 11.1 High-End-Workstation-Grafikkarte für Notebooks. Sie basiert wie die Consumer GeForce GT 680M auf dem GK104 Chip der Kepler-Serie und wird in 28nm bei TSMC hergestellt. Jedoch werden nur 960 statt der 1344 Shader wie bei der K5000M eingesetzt. Die Grafikkarte ist für die Chief River Generation gedacht (Ivy Bridge).
Die Quadro Grafikkarten bieten zertifizierte Treiber, welche auf Stabiltität und Performance bei professionellen Anwendungen (CAD-, DCC-, Medizin-, Prospektions-, Visualisierungsanwendungen) optimiert sind. Dadurch ist die Performance im Vergleich zu den Consumergrafikkarten mit gleichem Chip deutlich besser in diesen Bereichen.
Architektur
Mit Kepler löst Nvidia die bisherige Fermi-Architektur ab, die unter anderem bei verschiedenen Chips und Modellen der GeForce-500M-Serie zum Einsatz kam. Der GK104 verfügt als Kepler-Chip über 8 Shader-Blöcke mit je 192 CUDA Cores, die vom Hersteller mit dem Kürzel SMX bezeichnet werden. Bei der K4000M sind davon 5 aktiviert. Zwei SMX bilden zusammen mit zwei Polymorph Engines und einer gemeinsamen Raster Engine einen sogenannten GPC (Graphics Processing Cluster). Da die Shader keine eigene Takt-Domain mehr besitzen (Hot Clock), entspricht die Rechenleistung in etwa er Hälfte der Einheiten der Fermi-Architektur mit doppelter Taktrate. Diese Änderung ist einer der Gründe dafür, dass sich laut Nvidia die Energieeffizienz gegenüber dem Vorgänger verdoppelt hat. Auch die Tesselations-Leistung soll, speziell bei hohen Faktoren, noch einmal deutlich verbessert worden sein. Als zusätzliche Neuerungen werden zudem erstmals PCIe 3.0 sowie ein noch nicht näher bezeichneter, optionaler Turbo-Modus unterstützt. Dieser kann, ausreichende Kühlungsreserven vorausgesetzt, die Kerntaktrate um bis zu 15 Prozent anheben. Da der Turbo vom BIOS gesteuert wird, steht er, falls vom Notebook-Hersteller implementiert, unabhängig vom Betriebssystem zur Verfügung.
Leistung
Die Performance der Quadro K4000M liegt unseren Benchmarks zufolge deutlich oberhalb der Fermi-basierten Quadro 5010M und schlägt auch das Consumer-Modell GeForce GTX 675M. Neben speziellen CAD-Anwendungen ist die K4000M damit auch für anspruchsvolle 3D-Spiele des Jahres 2013 geeignet, die sie in hohen Auflösungen und Detailstufen bewältigt.
Features
Das aktualisierte Featureset umfasst nun die Unterstützung von bis zu 4 aktiven Displays (mit Optimus u.U. weniger), die mit einer maximalen Auflösung von 3840 x 2160 Pixeln zum Beispiel über DisplayPort 1.2 oder HDMI 1.4a angebunden werden können. HD-Audio-Formate wie Dolby True HD und DTS-HD lassen sich als Bitstream an einen geeigneten Receiver senden. Wie in der Vergangenheit kann jedoch auch weiterhin 3D Vision nicht mit Optimus-Unterstützung kombiniert werden.
Der PureVideo HD Videoprozessor der fünften Generation (VP5) wurde vom GF119-Chip übernommen. Dieser kann die Formate MPEG-1, MPEG-2, MPEG-4, H.264 und VC1/WMV9 bis zu einer Auflösung von 4k decodieren und somit den Prozessor entlasten. Auch zwei parallele Streams, beispielsweise für Picture-in-Picture bei einer Blu-Ray, sind möglich. Eine weitere Neuerung ist die Integration eines dedizierten Videoencoders ähnlich Intels Quick Sync, der über die NVENC-API angesprochen werden kann.
Die Leistungsaufnahme der Quadro K4000M ist laut Nvidia wie die alte Quadro 5010M und der stärkeren K5000M mit einer TGP (Max Power Consumption) von 100W spezifiziert und dadurch für 17-Zoll Plattformen geeignet.
Average Benchmarks NVIDIA Quadro K5000M → 100%n=16
Average Benchmarks NVIDIA GeForce GTX 1050 Max-Q → 188%n=16
Average Benchmarks NVIDIA Quadro K4000M → 80%n=16
- Bereich der Benchmarkergebnisse für diese Grafikkarte - Durchschnittliche Benchmarkergebnisse für diese Grafikkarte * Smaller numbers mean a higher performance 1 This benchmark is not used for the average calculation
Spiele-Benchmarks
Die folgenden Benchmarks basieren auf unseren Spieletests mit Testnotebooks. Die Performance dieser Grafikkarte bei den gelisteten Spielen ist abhängig von der verwendeten CPU, Speicherausstattung, Treiber und auch Betriebssystem. Dadurch müssen die untenstehenden Werte nicht repräsentativ sein. Detaillierte Informationen über das verwendete System sehen Sie nach einem Klick auf den fps-Wert.